Tehnologija
NOTRANJI RAČUN
The radial internal clearance of our products is same as the value of GB/T4604-93(equivalent of ISO 5753-1991),usually, the clearance of our products is basic group 0(Co), as well as other clearance at your request,the clearance can be divided the following group.
The radial internal clearance of our products is same as the value of GB/T4604-93(equivalent of ISO 5753-1991),usually, the clearance of our products is basic group 0(Co), as well as other clearance at your request,the clearance can be divided the following group. | |||||||||||
RADIAL INTERNAL CLEARANCE OF STANDARD RADIAL BALL BEARINGS | |||||||||||
Unit: um | |||||||||||
NOMINAL BORE | CLEARANCE | ||||||||||
DIAMETER | |||||||||||
d(mm) | GROUP 2 | GROUP 0 | GROUP 3 | GROUP 4 | GROUP 5 | ||||||
Corresponding | C2 | C0 | C3 | C4 | C5 | ||||||
OVER | INCL. | MIN | MAX | MIN | MAX | MIN | MAX | MIN | MAX | MIN | MAX |
2.5 | 6 | 0 | 7 | 2 | 13 | 8 | 23 | - | - | - | - |
6 | 10 | 0 | 7 | 2 | 13 | 8 | 23 | 14 | 29 | 20 | 37 |
10 | 18 | 0 | 9 | 3 | 18 | 11 | 25 | 18 | 33 | 25 | 45 |
18 | 24 | 0 | 10 | 5 | 20 | 13 | 28 | 20 | 36 | 28 | 48 |
24 | 30 | 1 | 11 | 5 | 20 | 13 | 28 | 23 | 41 | 30 | 53 |
30 | 40 | 1 | 11 | 6 | 20 | 15 | 33 | 28 | 46 | 40 | 64 |
40 | 50 | 1 | 11 | 6 | 23 | 18 | 36 | 30 | 51 | 45 | 73 |
- > Struktura ležaja
- > Ležajni material
- > Kletka / zadrževalnik
- > OBLIKA ŠČITA IN TESNIL
- > KOLJČNA NOSILNOST-TOLERANCIJA
- > VIBRACIJA IN Hrup
- > NOTRANJI RAČUN
- > MAZANJE
- > GRAD / STANOVANJA
- > ŠKODA NA LEŽALIH
- > How to prolong the service time of bearings
- > The characteristics and causes of bearing grinding cracks and preventive measures
- > Item Interchange of miniature bearing